Blood Bowl Magnetic Scoreboard

2 06 2008

I finished off my magnetic Blood Bowl 7s Scoreboard today. I’m really happy with how it turned out.

The materials used were things found very easily and cheaply. This is what you need to make it.

  • Paddlpop sticks
  • 2 Skewers
  • 2 Corks
  • 1 thin fridge magnet
  • Some foamcore
  • Small washers
  • PVA glue
  • Superglue
  • Paint

To start I chopped the skewers down to slightly longer than the desired height of the scoreboard. The sharp ends are smeared in PVA glue and stuck into the centre of the upright cork.

Once dry, simply glue the paddle pop sticks on to make the board section and then wait for it to dry.

Once dry, paint it up however you see fit. Cut up your fridge magnet so you get two small squares and glue them onto the scoreboard.

This is what it should look like:

Then all you need to do is create the score markers. These are made by cutting up small squares of foamcore and cutting cracks in them. Make sure these squares are larger than the magnet pieces you cut out.

Paint them up with the numbers on them and then superglue a small washer to the back of the number.

Once dry these will stick to the magnetic squares on your board.

Here is what the finished score markers look like:

The only problem with this scoreboard is that it makes the dugouts look very untextured and flat. The Worldworks Games (WWG) stuff is awesome, but I find it doesn’t mix well with scratchbuilt terrain. This means that I’m going to have to scratchbuild some dugouts to go on the board.

The WWG Chunky Dungeons that I have made can be put to good use when I build my DungeonBowl board later in the year.

I hope this was helpful. If you have any questions, please don’t hesitate to leave a comment.

– Ben.

Advertisements

Actions

Information

One response

7 06 2008
Angstboy

Try using Fleckstone spray paint for texture on your dugouts. You can get it in the appropriate shades, and if you use a screen to lighten the spray a bit, it should work pretty well. (Obviously test this on a piece of paper first, but we did this quite effectively in high school for some proejcts)

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s




%d bloggers like this: